Disclosure: This post may contain affiliate links, including Amazon links. As an Amazon Associate I earn from qualifying purchases. Commissions may be earned at no extra cost to you. Content is for informational purposes only and not professional advice.
Why it’s great
A mandoline or a sharp chef’s knife doesn’t forgive a slip, and these gloves are a cheap way to take the sting out of one. The lightweight knit is reinforced with stainless steel thread on the three fingers most likely to meet the blade, so you keep dexterity without wearing a bulky mesh glove. They’re ambidextrous, machine washable and come in five sizes. Buyers describe near misses on onions, mower blades and oyster knives that ended without a scratch, with a few caveats on fit and grip.
Bottom line
An affordable, washable cut-resistant glove for kitchen blades, as long as you size up carefully and keep it away from heat.
Best for
- Home cooks who use a mandoline, box grater or microplane and want finger protection
- Cooks who are learning knife skills and want a safety net while they build speed
- People carving, whittling or cleaning a meat slicer, uses buyers describe
- Shoppers who want a lightweight glove they can wash and reuse
Who should skip this
- Anyone who needs heat protection. This is a cut-resistant glove, and the manufacturer’s sheet says it is not fireproof, so use oven mitts or heat-resistant gloves for hot cookware.
- Cooks who want a grippy surface. Buyers say the smooth knit can feel slick on wet or greasy food.
- People who need stab or puncture protection or plan to use power tools. The manufacturer’s sheet says the gloves are not puncture proof and not for power tools.
- Buyers who are between sizes and can’t easily exchange. Several say the gloves run small compared with the size chart.
Key features
- Reinforced fingers: stainless steel thread woven into the three fingers most exposed to cuts, with the rest of the glove made from a lighter cut-resistant knit.
- Cut rating: the listing claims EN 388 level 5 (EN 388 is the European standard for protective gloves, and level 5 is the top mark on its 1 to 5 cut scale).
- Materials: polyethylene, glass fiber and spandex, with a medium-stretch, lightweight knit.
- Sizing: five sizes from XS to XL, with a size chart that matches hand width (about 2.9 to 4.8 inches) and hand length (about 2.6 to 4.5 inches).
- Ambidextrous fit: one design fits either hand.
- Care: machine washable on a cool cycle with mild detergent, then drip dry. The spec table says the gloves are not waterproof or water resistant.
- Food safe: the listing describes them as food grade and food safe for slicing, cooking and food handling.
Performance and usability
- Buyers trust the protection. One bumped mower blades with a thumb and had no cuts to the glove or hand, and another says a knife slid through an onion without reaching a finger.
- Fit runs small. Several buyers say they needed a size up and that the index fingertip can feel loose, while others found the fit comfortable. Measure your hand width and length against the chart.
- Grip is only so-so. One buyer found the reinforced version loose and slippery on an onion. AmazingRibs tested NoCry’s microdot-grip version and found wet surfaces fine, with greasy ones a bit slippery.
- Wet jobs are fine, drying is slow. Buyers wear them for oysters, crab pots and fish, but they aren’t waterproof and one notes a wet pair takes a while to dry, so a second pair helps.
- Support is responsive. One buyer got a replacement pair in a larger size within a week after a seam began to rip.
Real world use cases
- Slicing potatoes, cucumbers and lemons on a mandoline without fear of the last nub
- Cleaning or filleting fish
- Chopping onions and other hard vegetables as a beginner
- Cleaning a meat slicer or carving a roast
- Whittling, wood carving and other hobby work with hand tools
Pros & cons
| Pros | Cons |
|---|---|
| Stainless steel reinforcement on the three most exposed fingers | Buyers say the sizing runs small, so choosing a size takes care |
| Lightweight knit that keeps dexterity for knife and mandoline work | Protects against cuts only, not heat, puncture or soaking |
| Machine washable and reusable | |
| Ambidextrous design in five sizes | |
| Listed as food grade, with a limited lifetime warranty |
Trust signals
This product has not been covered by the major independent review outlets, which is common for budget safety gear from specialty brands. What is available to go on instead is the manufacturer’s limited lifetime warranty, the care and limits guidance on its product sheet, and the consistent themes in verified buyer feedback. Buyers most often praise the comfort, the near misses that ended without a cut and responsive customer service.
The product page describes a limited lifetime warranty, and it links the full terms, so confirm the details with NoCry before you rely on it. The gloves are sold by NoCry Work Gear and ship from Amazon, with Amazon’s voluntary 30-day return guarantee listed on the page. The manufacturer’s sheet calls the gloves cut resistant rather than cut proof and warns that repeated cutting with a sharp blade can cause unraveling.
Scorecard
| Category | Rating | Notes |
|---|---|---|
| Aesthetic & Form Factor | Medium | A plain grey knit with a snug, low-profile fit. |
| Space Efficiency | High | Light and flat, so it fits in a utensil drawer. |
| Performance & Speed | High | Buyers report reliable cut protection for blades, mandolines and oyster knives. |
| Ease of Cleaning & Maintenance | Medium | Machine washable, but buyers say a wet pair dries slowly. |
| Quietness | N/A | A glove has no moving parts, so this factor doesn’t apply. |
| Build Quality & Durability | Medium | Reinforced fingers, though one buyer saw a seam rip and the maker warns of unraveling. |
| Ease of Setup / Learning Curve | Medium | Easy to wear, but the sizing runs small and needs care. |
| Eco & Sustainability | Medium | Reusable and washable, though made from synthetic fibers. |
| Value / Price-to-Performance Ratio | High | Buyers call it well worth the money to avoid cuts. |
| Portability | High | Light and small enough to keep in a drawer or tackle box. |
What is in the box
- 1 pair of NoCry reinforced grey cut-resistant gloves, in the size you select
Final verdict
The NoCry reinforced gloves are an inexpensive, comfortable way to protect your fingers on a mandoline, a grater or a slippery onion. Order by the size chart with a bit of caution, since buyers say they run small. They protect against slices, not heat, puncture or power tools.
What to know before buying
Cut-resistant gloves reduce the risk of a slice, but they are not a license to be careless. Match the glove to the hazard, and choose a size that keeps your fingertips snug.
Q: What Matters in a Cut-Resistant Glove
A: Check the cut rating, the fit and what the glove won’t stop. Ergodyne notes that ANSI/ISEA 105 scores run from A1 to A9, while EN 388 cut scores run from 1 to 5, so the scales differ. Snug fingertips matter for control, and cut-resistant gloves rarely cover puncture, heat or water.
Q: How It Compares to Alternatives
A: Knit gloves like this one stay light and flexible, while stainless steel mesh gloves offer more cut protection at the cost of weight and cost. AmazingRibs tested NoCry’s microdot-grip model and found no penetration from sharp objects, though it noted some slipperiness on greasy surfaces. Heat-resistant gloves are a separate category built for hot cookware.
Q: Who This Category Is Best For
A: Home cooks and hobbyists who work with mandolines, graters, oyster knives and fish or meat knives, and who want a washable layer of finger protection.
Q: Who It’s Not Ideal For
A: Anyone who needs heat, puncture or power tool protection, and people who can’t easily exchange a glove that doesn’t fit.
Q: What to Check Before You Buy
A: Measure your hand width and length against the size chart and consider sizing up, since buyers say the gloves run small. Confirm which standard and level the cut rating refers to, noting that the listing cites EN 388 level 5 while ANSI/ISEA 105 uses A1 to A9, and ask NoCry for the test report if you need it. Make sure you are choosing the reinforced grey version rather than the separate microdot-grip listing, and check the warranty terms and return window.
Editor’s Summary for NoCry Reinforced Cut Resistant Gloves
oCry Cut Resistant Gloves, Reinforced (Grey), CutGuard+ Reinforced, stainless steel thread in three fingers, sizes XS to XL
These NoCry cut resistant gloves add stainless steel reinforcement to the three fingers most at risk, in a lightweight, machine-washable knit that comes in five sizes.
Product Brand: NoCry
4.5
Pros
- Stainless steel reinforcement on the three most exposed fingers.
- Lightweight knit that keeps dexterity for knife and mandoline work.
- Machine washable and reusable.
- Ambidextrous design in five sizes.
- Listed as food grade, with a limited lifetime warranty.
Cons
- Buyers say the sizing runs small.
- Protects against cuts only, not heat, puncture or soaking.
