Disclosure: This post may contain affiliate links, including Amazon links. As an Amazon Associate I earn from qualifying purchases. Commissions may be earned at no extra cost to you. Content is for informational purposes only and not professional advice.
Why it’s great
Heavy cookware is hard on cabinets: pots stack badly, lids get lost, and everything you want is at the bottom. A wall-mounted pot rack solves that by hanging cookware where you can see it, and this one is a straightforward version. It has a 30-inch grid shelf with a guard rail, a lower bar with 12 detachable S-hooks, and two mounting holes 16 inches apart so it lines up with standard studs. The matte black powder coat suits most kitchens, buyers say the quality is good, and the rack frees up real cabinet space. Because it carries real weight, the details that matter are the wall behind it, the screws, and a load rating the listing states several different ways.
Bottom line
A good-looking, stud-mounted pot rack that works well if you mount it into studs and plan around the lowest stated load rating, not the highest.
Best for
- Home cooks who want heavy pots, pans, and mixing bowls on the wall instead of in cabinets
- Kitchens with studs spaced 16 inches apart, where the two mounting holes line up
- Small kitchens that need to reclaim cabinet space
- Anyone who likes cookware on display and within reach
- Buyers who want a manufacturer’s one-year warranty listed on the page
Who should skip this
- Renters who cannot drill into walls, since this rack is screw-mounted
- Walls without studs at 16 inch spacing, or where you cannot find a stud, since the load rating depends on the wall
- Anyone planning to hang a large set of cast iron near the top of the stated range, given the conflicting ratings
- Anyone who expects the included screws to be enough, since buyers report the screws are inadequate
- Anyone who wants lid holders, which this model does not include
Key features
- Two-tier matte black rack in powder-coated metal, listed at 29.9 inches wide, 9.8 inches deep, and 20.5 inches tall, weighing 7 pounds, with a grid shelf and a guard rail; 12 S-shaped hooks are detachable and movable
- Two mounting holes 16 inches apart extend below the rack for stud mounting; the listing says there is room for a drill, and that the included heavy-duty stainless steel screws and dual-use anchors suit drywall and solid walls. Hardware and instructions are included
- The listing carries a one-year manufacturer’s warranty, along with Amazon’s 30-day return guarantee, and a recycled-content feature of at least 50 percent under the Recycled Claim Standard Blended
- Listing check, load rating: the product copy says a maximum load of 100 pounds, but only when screw-mounted on a solid concrete wall. The spec table says 50 pounds, other retail pages for the same model number say 55 pounds, and a sibling KES model lists 88 pounds. The rating on a stud or drywall is not stated, so plan around 50 pounds
- Listing check, hardware: the copy promotes heavy-duty stainless steel screws, but buyers report the supplied screws are inadequate and difficult to work with. Be ready to buy your own screws or anchors suited to your wall
- Listing check, model: Amazon notes that a newer KES 2-tier rack exists, and the brand sells versions with lid holders and a single-tier version, so confirm the model number matches what you want. The spec table also leaves the number of shelves blank
Performance and usability
- Amazon buyers describe good quality and a well-designed rack that is worth the money, with room for their pots and pans, including nonstick cookware sets
- They also say it suits smaller kitchens, frees cabinet space, and looks good on the wall
- Installation feedback is mixed: some buyers find it easy to assemble and mount, while others report difficulty, and the quality of the supplied screws draws negative comments
- Plan the load before you drill. A few pieces of cast iron can weigh more than you expect, so add up your heaviest pots, spread them across the hooks, and treat 50 pounds as the working limit unless you have confirmed otherwise
- The manufacturer says installation should take about 10 minutes, and the rack is easiest to hang with a second person holding it level while you drive the screws
- No independent testing of this model turned up, so long-term performance under heavy loads is unverified
Real world use cases
- Hanging heavy pans, skillets, and mixing bowls from the hooks, with ladles and utensils on the same bar
- Moving the cookware you use every day out of a crowded lower cabinet
- Using the grid shelf above the hooks for small items such as oils and jars, within the load limit
- Creating a coffee nook on a bare wall, with mugs on the hooks and supplies on the shelf
- Displaying a set of copper or cast iron cookware as part of the kitchen decor
- Freeing cabinet space in a small apartment kitchen, where the owner can mount into studs
Pros & cons
| Pros | Cons |
|---|---|
| Two-tier design with 12 movable hooks and a guard rail on the shelf | The load rating is stated as 100, 55, 50, and 88 pounds across the listing and related pages, and the 100 pound figure applies only to a concrete wall |
| Mounting holes spaced for 16 inch studs, with a one-year manufacturer’s warranty listed | Buyers report the supplied screws are inadequate, and installation feedback is mixed |
| Buyers call the quality good and the rack worth the money | |
| Matte black powder coat and a recycled-content feature of at least 50 percent |
Trust signals
As of October 2026, no review of this specific rack turned up from Wirecutter, Good Housekeeping, Serious Eats, or Consumer Reports. Some roundup sites describe their own testing, but those are affiliate roundups rather than independent testing, so none is cited here. KES sells the rack directly through Amazon and publishes a one-year manufacturer’s warranty on the listing.
The Amazon product page also links to further warranty information, so confirm the details and who handles claims before buying.
Scorecard
| Category | Rating | Notes |
|---|---|---|
| Aesthetic & Form Factor | High | Matte black powder coat that buyers say looks good |
| Space Efficiency | High | Moves bulky cookware onto the wall and frees cabinet space |
| Performance & Speed | Medium | Holds cookware well per buyers, but the load rating is inconsistent and depends on the wall |
| Ease of Cleaning & Maintenance | Medium | Powder-coated metal wipes clean, though a grid shelf catches dust |
| Quietness | N/A | Static fixture with no moving parts |
| Build Quality & Durability | High | Buyers call the quality good, though the supplied screws draw complaints |
| Ease of Setup / Learning Curve | Medium | Hardware and instructions included, but installation feedback is mixed and it needs stud finding and drilling |
| Eco & Sustainability | Medium | Metal construction with a recycled-content feature of at least 50 percent |
| Value / Price-to-Performance Ratio | Medium | Premium price tier, offset by a warranty and buyers who call it worth the money |
| Portability | N/A | Installed fixture, not a portable product |
What is in the box
- One 30-inch two-tier pot rack with a grid shelf and guard rail
- Twelve S-shaped hooks
- Heavy-duty stainless steel screws and dual-use anchors
- Installation instructions
Final verdict
The KES rack is a well-liked, good-looking way to put heavy cookware on the wall, and its 16-inch stud spacing and one-year warranty make it easier to trust than most. The weak spots are the load rating, which appears as 100, 55, 50, and 88 pounds depending on where you look, and screws that buyers say are not up to the job. Mount into studs with your own hardware if needed, plan around 50 pounds, and it is a solid pot rack.
What to know before buying
Wall-mounted pot racks put heavy cookware on display, but they ask more of your wall than almost any other organizer. How you mount one matters more than which one you buy.
Q: What matters in a wall-mounted pot rack
A: Mounting comes first. Find your studs, check that the rack’s hole spacing matches them, and choose fasteners suited to the wall. Then add up the weight of the cookware you plan to hang and compare it to the lowest load rating you can find, since ratings often depend on the wall type.
Q: How it compares to alternatives
A: Ceiling-mounted pot racks hold more but need overhead mounting, and single-tier wall racks are lighter and simpler. This two-tier wall rack adds a shelf above the hooks, and versions with lid holders cost more.
Q: Who this category is best for
A: Wall pot racks suit cooks with heavy cookware, limited cabinet space, and a wall they are comfortable drilling into, especially in small kitchens where visible, reachable storage helps.
Q: Who it’s not ideal for
A: Skip this style if you rent and cannot drill, if you cannot find studs at the right spacing, or if you plan to hang very heavy loads without confirming the rating for your wall type.
Editor’s Summary for KES Wall Mounted Pot Rack
KES 30-Inch Kitchen Pot Rack, Wall Mounted, Matte Black 2-Tier Wall Shelf with Guard Rail and 12 Hooks, Model KUR215S75B-BK
KES 30-Inch Kitchen Pot Rack has a 30-inch grid shelf with a guard rail, a lower bar with 12 detachable S-hooks, and two mounting holes 16 inches apart so it lines up with standard studs. The matte black powder coat suits most kitchens.
4.5
Pros
- Two-tier design with 12 movable hooks and a guard rail on the shelf.
- Mounting holes spaced for 16 inch studs, with a one-year manufacturer's warranty listed.
- Buyers call the quality good and the rack worth the money.
- Matte black powder coat and a recycled-content feature of at least 50 percent.
Cons
- The 100 pound load rating figure applies only to a concrete wall.
- Buyers report the supplied screws are inadequate, and installation feedback is mixed.
